TIG welders
TIG welders use a non-consumable tungsten electrode shielded by argon, while filler is added by hand from a separate rod. Slower than MIG/MAG, it gives clean, precise joints on thin sheet, stainless steel, tubing and aluminium. Direct current (DC) is enough for steel and stainless steel, while aluminium needs a machine with alternating current, labelled AC/DC. Check how the arc is started: high-frequency (HF) ignition is contactless and does not contaminate the electrode, while lift-arc is simpler. Useful extras are a pulse mode for thin material, foot pedal current control and adjustable gas post-flow. Compare the current range and the duty cycle at a given current, the supply (230 V or 400 V) and whether the machine also works as an MMA stick welder. Choose the tungsten electrode type and diameter by current and material, and prefer lanthanated or ceriated to thoriated ones (red tip). Protection is essential: a TIG arc gives off strong UV, so wear a helmet, gloves and clothing that covers the skin, and remove fumes and ozone with extraction. People with a pacemaker should consult a doctor before welding. Delivery options and cost depend on the seller and the product.