Built-in Sink
A built-in sink is set into a worktop or vanity unit, so that the surface around it acts as a shelf. There are three basic types. A drop-in sink is lowered in from above and rests on the worktop by its rim, which makes it easy to fit and replace. An undermount sink is fixed beneath the worktop, so water and dirt can be wiped straight from the worktop into the basin, but the worktop must be water-resistant and have a finished cut-out edge, for example in stone, composite or compact laminate. A semi-recessed sink projects partly beyond the front of the worktop and suits shallow units. Makers usually supply a template or dimensions for the worktop cut-out; do not cut the worktop before the sink arrives, and check the measurements on the actual piece. Before cutting, also decide where the tap goes: on the basin if it has a tap hole, on the worktop or on the wall. The joint between sink and worktop is sealed with mould-resistant sanitary silicone. Check whether the sink has an overflow and whether there is enough room under the worktop for the trap and the unit's drawers.