Built-in LED Lights
Built-in LED lighting, meaning downlights and panels, is fitted into a plasterboard suspended ceiling, furniture or a wall and gives even light with no hanging fixtures. Before buying, measure the cut-out diameter and check the depth needed above the ceiling, because a hole is hard to make smaller once it has been cut. There are fixtures with an integrated LED source and an external driver, and fittings that take a bulb, usually GU10, which is easy to replace. Fixed downlights point straight down, while adjustable ones can be aimed at a wall or a picture. The beam angle decides how widely the light spreads: a narrow beam creates distinct pools of light and a wider one gives more even lighting, so plan the spacing between downlights according to the beam angle and ceiling height. For bathrooms and the area above a kitchen worktop, check the IP rating: in the bath and shower zones, wiring rules call for at least IPX4. Some fixtures must not be covered with thermal insulation, so read the instructions. If you want dimming, the driver and the dimmer must be compatible. Leave installation and wiring to an electrician.