LED Strips for Cars
LED strips for cars are flexible strips of diodes for lighting the cabin, boot, under the seats and parts of the bodywork. There are single-colour strips and RGB strips whose colour is changed with a remote or an app. Wiring into the car needs 12 V strips; 5 V strips run from a USB port, and mains strips are not for cars. The IP rating shows the level of protection: basic protection is enough inside the cabin, while strips under the car or in the wheel arches should be IP67 or higher because of water and dirt. Measure the length of the mounting area; strips can be cut only at the marked points. Look at the quality of the adhesive backing, because weaker tape peels off in a hot cabin, and clean the surface well before sticking. Power from a 12 V socket or USB is simple, while wiring into the car needs a fuse of the right rating and is a job for an auto electrician. For strips visible from outside, check before fitting whether they are allowed on the road, and place them so that they do not look like the car's lights or dazzle others.