Car batteries
Choose a car battery using the data in the vehicle manual or on the label of the battery you are replacing. Passenger cars use 12 V batteries, which differ in capacity (Ah), cold cranking current (A, usually to the EN standard) and dimensions. Check the terminal layout: if plus and minus are swapped compared with the old battery, the cables often cannot reach the terminals. Cars with start-stop systems use EFB or AGM batteries and should not get a conventional battery; if an AGM battery was fitted at the factory, choose AGM again. Capacity and cranking current can match or slightly exceed the recommended values, but should not be lower. Look at the production date, since a battery that sits on a shelf for a long time loses charge. On some newer cars a new battery has to be registered in the vehicle system with a diagnostic tool, so check the manual or ask a workshop. When replacing, wear safety glasses and gloves, keep flames and sparks away, disconnect the negative terminal first, then the positive, and reconnect in the reverse order. An old battery contains lead and acid and belongs at a recycling collection point.